客服热线:400-821-7201 
E-mail:market@jinhandz.com
index> JDS2012A

Oscilloscope Technical Specifications:

JDS2012A User Manual

  • Enter                                                        
    Maximum sampling rate: 200MSa / S
    Channels: 1
    Bandwidth: 20MHz (can be measured 33MHz)
    Vertical Resolution: 8 bits
    Input range: 10mv-5v; 100mv-50v (probe X10) (1,2,5 steps)
    Vertical Accuracy: + / -3%
    Impedance: 1MΩ 25pF
    Coupling: DC, AC
    Display mode: Y-T
    Input voltage: 40v (probe X10); 400v (probe X10) 220v voltage can be measured; (probe X100) 2000v voltage can be measured
    Time base                                                           
    Time Base Range: 10ns-50ms (1,2,5,5 step) 100ms-5s (Scan scan)
    Memory Depth: 2K
    Trigger                                                               
    Modes: Auto, Normal and Single
    Type: rising edge, falling edge
    Automatic detection: Support (50Hz-40MHz)
    Level:
    Digital                                                   
    Measurement: peak to peak and frequency
    Cursor: Cursor support time and voltage
    Equipment                                                  
    Screen: 3.2-inch, 16-bit true color, TFT, 320 * 240
    Battery: 3000 + mA lithium battery (single cell about 7 hours of continuous work)
    Size: 202 * 100 * 35 (mm)

     

     

    Multimeter Technical Specifications:

     

    Full-scale reading: 4000 count
    DC voltage: 400mv/4.000v/40.00v/400.0v/1000v 5 files
    AC voltage: 400mv/4.000v/40.00v/400.0v/750v 5 files
    Resistance measurement:400.0Ω/4.000KΩ/40.00kΩ/400.0kΩ/4.000mΩ/40.00mΩ 6 files
    Capacitance measurement: 51.20nF/512.0nF/5.120UuF/51.20uF/100uF (30Sec) 5 files
    Off detection: less than 60Ω when the buzzer alarm
    Diode measurements: 0v-1.5v